ASTM 5052 Smooth Surface Silver Aluminium Coil 0.3mm Thickness For Decoration
5052 aluminum coil has fatigue strength: high plasticity and corrosion resistance, can not be strengthened by heat treatment, in the semi-cold hardening plasticity is good, cold hardening plasticity is low, good corrosion resistance, good weldability, bad machinability, polishing.
The strength and plasticity of 5052 aluminum coil weld is high, and the strength of weld reaches 95%~98% of the strength of matrix metal. But the air tightness of the weld is not high, it is recommended to use 5A03 alloy as solder, which can improve its air tightness and eliminate the crack tendency.
5052 aluminum coil properties
Tensile strength (σb) : 175 to 305MPa
Conditional yield strength σ0.2 (MPa)≥90
Elastic modulus (E) : 69.2 ~ 70.6Gpa
Annealing temperature: 350℃
| Product |
Aluiminum strip, aluminum coil |
| Commodity |
Alloy |
Temper |
Gauge (mm) |
Width (mm) |
Length (mm) |
Standard |
| Al.sheets for cladding wall/curtain wall |
1XXX 3XXX 5XXX |
HX4 |
0.2-12 |
1630 |
1000~ 6000 |
GB/T3880 GB/T3199 YS/TS429.1 |
| Al.alloy sheet/strip |
5052 |
H1x H2x H3x |
0.2-20 |
1630 |
Strip/ sheet |
GB/T8544 |
| Al.strip for composite panel |
1XXX 3XXX 5XXX 8XXX |
H1x H2x H3x |
0.2-20 |
1630 |
Strip |
YS/T432 YS/T434 |
| Foil stock |
1145 1235 1200 8XXX |
H14 H24 |
0.01- 0.6 |
1630 |
Strip |
YS/T457 |
| Commercial Sheet/strip |
1XXX 3XXX 5XXX |
0 H1x H2x H3x |
0.2-20 |
1630 |
Strip/ sheet |
GB/T3880 GB/T3199 YS/T490 YS/T431 |
| Remark:Besides the stipulations in the above table,the specific technical agreement,if any,can be signed by the seller and buyer after mutual discussion. |
Product Details
Packing and Shippment
Certification
Your message must be between 20-3,000 characters!
